Carolina HomePro Inspections logo


What's Inspected During the Home Inspection




A complete comprehensive visual examination of the home is performed. A general description of the characteristics of each area of the home is documented, along with any suggested home improvement recommendations that are observed during the home inspection process.

1. The Roof, Chimney & Flashing: Answers to important questions such as the type of roof of the home, its present condition and approximate age, and the likelihood of replacement in the coming years is discussed with the client. The chimney and flashing of the home and condition is also inspected and documented in the home inspection report. Home inspection of floor structure

2. The Exterior: An examination of the exterior of the home is conducted. The conditions of wall surfaces, flashing integrity and trim are evaluated, and entryway doors and windows are examined for proper operation and condition.
3. The Structure: Examination of the home foundation, floor and wall structure, columns, ceiling and roof structure. Structural components are further evaluated when deterioration is suspected. Any visible signs of water penetration are documented in the home inspection report.

4. The Interior and Fireplaces: The interior home inspection involves such areas as the walls, floors and ceilings. Doors and windows of the home are checked for proper operation. Notations are made if signs of water penetration exist. Fireplace system components of the home, with a review of the vent system, flues and chimneys are examined. home inspection of heatng and air conditioning systems

5. Heating Systems: The energy source for the home along with the type of equipment and distribution system is evaluated and recorded in the home inspection report as well as the approximate age of the equipment. Systems are operated and visually examined by opening readily accessible access panels.

6. Air Conditioning Systems: Central air conditioning equipment is inspected and system capacity and approximate age is recorded in the home inspection report. The cooling system of the home is operated (if temperatures permit) and visually examined by opening readily accessible access panels.

7. Insulation and Ventilation: Observations and notations are made concerning the type and amount of insulation and whether vapor barriers exist in unfinished areas of the home. Ventilation of the home is checked in attics and foundation areas, along with kitchen, bath and laundry venting systems.

8. Electrical System: Service equipment of the home along with grounding, and main and distribution panels are checked. Polarity and grounding of receptacles are observed. Ground Fault Circuit Interrupters are tested for proper operation. home inspection of plumbing systems

9. Plumbing System: Interior supply of the home and service lines are observed, piping materials are recorded, and fixtures and faucets are checked. Functional water flow of the home and drainage are observed. Hot water systems of the home are checked for operation and the condition of the system is recorded in the home inspection report.

10. Appliances: All kitchen appliances attached to the home are run through full operational cycles.



Home | Profile | Home Buyer Info | Home Seller Info | Consumer Home Info
What's Inspected During the Home Inspection | Additional Home Inspection Services


Email: Inspection@Carolina-HomePro.com

www.Carolina-HomePro.com